Montblanc Meisterstück 136 Fountain Pen Review

Montblanc Meisterstück 136 Fountain Pen

The 13X series of pens were the first Montblancs to feature a piston filling mechanism. The 136 was the senior size pen just as the 146 is today in the current Meisterstück line.

The 13X series was produced in the mid 1930s to the end of the 1940s and possibly into the early 1950s as there was a brief point when the 13X line and 14X were sold simultaneously.

There are several variations of the 136 which I won’t cover here other than to say that my version is a later model with the shorter ink window.

Montblanc Meisterstück 136 Fountain Pen

The differences between the 136 and the original 146 were mostly in design. The 146 had (and still has) a streamlined cigar shape where the 136 has more of a flat top.

Montblanc Meisterstück 136 Fountain Pen
136 cap with a star that has turned ivory in color over the years

They both had the same telescopic piston filling mechanism but if you look at the end of the barrel on a 136 you can see two knobs…the one at the very end is the regular piston filling knob you use to draw ink into the pen and the one below that is used to remove the actual piston filling mechanism…this makes repairs slightly easier.

Montblanc Meisterstück 136 Fountain Pen

I am quite fond of vintage Montblancs because they were very well made and have wonderful nibs. Unfortunately, these pens are expensive today, despite being mass produced.  Montblanc is now very valuable luxury brand name and this has had an effect on the prices of their vintage pens.

Like most pens, the larger the size in a given series the more expensive the price and that is certainly the case here. The oversized 138 and 139 are the most valuable and the 132 is the least. A 136 in black celluloid can range from about $400-$1,000 depending on condition. Most will be in the $600-$800 range.

All piston filler Meisterstücks that I have owned are suitable for daily use; they are reliable workhorses. With the older celluloid models, however there are a couple of things to look out for: 1) The cork piston seal. If the cork dries out there will be no seal, meaning you won’t be able to draw up ink.  The best thing you can do to prevent this is to use the pen regularly.  Alternatively, you can store your pen with water but be advised this method is not foolproof  2) Celluloid shrinkage. Many old Meisterstücks suffer from this and sadly there is no cure. The good news is that this rarely causes functional problems. Shrinkage on the cap can cause the cap rings to come loose and you may see subtle dips and bulges on the body and cap. On my pen there is some shrinkage on the section. You can see a little bump in the middle of it.

Montblanc Meisterstück 136 Fountain Pen

My 136 is fitted with a beautiful OB nib.

Montblanc Meisterstück 136 Fountain Pen

This nib is very soft and is wonderful to write with. These nibs were hand made and most I have come across are very soft. I have seen some Meisterstücks with flex nibs but these are considered extremely rare and generally command a small fortune.

Modern 146 on top and the 136 on the bottom
Modern 146 on top and the 136 on the bottom

You can see that the 136 has a larger and more shapely nib compared to what is currently used on a modern 146.

Again, modern 146 on top and the 136 on the bottom
Again, modern 146 on top and the 136 on the bottom
A view from the side shows that the feed is practically flush with the nib.
136 nib from the side

The 136 has a flat “ski-slope” ebonite feed that provides a generous amount of ink to the nib.

Ebonite "ski-slope" feed...looking ready for a deep cleaning
Ebonite “ski-slope” feed…looking ready for a deep cleaning

Montblanc Meisterstück 136 Fountain Pen

You will notice that unlike modern Meisterstücks the cap band is English, not German, and reads “MONTBLANC MASTERPIECE”.  This signifies that my 136 was an export model.  There is some debate about whether pens with “MASTERPIECE” on the cap band are more or less common than those that read “MEISTERSTÜCK”.  Based on what I have seen for sale on 13X and early 14X pens the cap bands in English are the most common.

Montblanc Meisterstück 136 Fountain Pen

The 136 weighs approximately 24 grams and measures 13cm long (or about 1.5cm shorter than the current 146). The 136 feels nice in hand and is a very comfortable size.

Montblanc Meisterstück 136 Fountain Pen

If you are looking for a vintage Montblanc I highly recommend a 136.

Advertisements

One thought on “Montblanc Meisterstück 136 Fountain Pen Review”

  1. A beautiful pen! Thanks for the review. I have a 236 from the same time period. It has two narrow cap bands, without the “Meisterstück” band, of course. The piston knob and the cap finial are hard rubber, and the nib does not have the Meisterstück decoration. Mine has an EF semi-flexible nib.

    [img]http://i.imgur.com/dv3HoXe.jpg[/img]
    [img]http://i.imgur.com/qQlKOq4.jpg[/img]

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s